High- speed rolling doors

High-speed doors are especially suitable for the factories, warehouses and supermarkets. Saves heat escapes through rapid closing and also to quickly move through the gate and thus saves money for idle people. High-speed doors in front of you in an instant and then open a little slower closed. They are made of polyester films thick walled with reinforcements and side parts and other metal parts are made of galvanized material. The foil can be complemented by transparent antifreeze PVC or the possibility of producing full bright fillings speed door.

There are 3 types of high-speed doors:

High-speed doors Sperol Standard

High-speed doors are used for passages to 12 square meters (open area). They are intended for indoor use only. The advantage is fast closing with great operational safety and low cost of ownership.

vrata rychloběžná standard sperol

filler door

  • 2 mm PVC with stripes výstažnými
    PES 1mm viewing window safety stripe from 1350 to 2250 mm above the floor, orange RAL 2004
    PES 1 mm without vision, orange RAL 2004

color: RAL 9010, RAL 7038, RAL 5010/5012, RAL 6024, RAL 1003, RAL 3002

The width of the guide profiles: 120mm

speed

  • openning and closing: 0,8 m/s

operation: 0,75kW, 3 x 400V, motor brake 5N/m

 

High-speed doors Sperol Profi

Quick winding gates Profi can be manufactured in widths up to 12 meters. The maximum area of 42 square meters to the gate. Precise workmanship and high security against wind loads thanks to a tubular reinforcements integrated into the filler door can withstand wind speeds up to 80 km / h.

rýchloběžná vrata fóliová Sperol

 

Výplň vrat

  • PVC 2mm plně transpartentní s výstažnými pruhy
  • PES 1 nebo 1,5mm s bezpečnostním průhledovým pruhem – 1350 až 2250 mm nad podlahou, oranžová RAL 2004
  • PES 1 nebo 1,5mm bez průhledu, oranžová RAL 2004

color: RAL 9010, RAL 7038, RAL 5010/5012, RAL 6024, RAL 1003, RAL 3002

The width of the guide profiles: 220-300mm

speed

  • openning and closing: 0,5 – 0,8 m/s

operation: 0,8kW až 1,8kW, 3 x 400V, motor brake 9N/m

High-speed doors Sperol Speed

High-speed doors foil Speed are an exclusive product category of industrial high-speed doors. Designed for passageways to 25 square meters. Used microprocessor-controlled frequency converter for the power drive unit, which allows soft start and range of doors and mechanical stresses the parts of the door is minimized. It ensures long-term reliability and high service life.

Rychloběžná vrata speed sperol

filler door

PES is a layered fabric colors according to the sampler. Supplemented with vision panel or perform as required.

  • 2 mm PVC with stripes výstažnými
    PES 1mm viewing window safety stripe from 1350 to 2250 mm above the floor, orange RAL 2004
    PES 1 mm without vision, orange RAL 2004

color: RAL 9010, RAL 7038, RAL 5010/5012, RAL 6024, RAL 1003, RAL 3002

The width of the guide profiles: 230mm

speed

  • opening: 1,5-2,5 m/s
  • closing: 0,8m/s

operation: 0,8kW – 1,5kW, 1x 230V, 50Hz,braked motor 9N/m, The engine speed is controlled by a frequency converter.

 

Ways to control speed doors

  • button
  • movement radar
    remote control
    Induction loop
    pull switch
    photocell
    coded lock

 

How to proceed when ordering

High-speed foil doors can be ordered in two ways by phone or in person at the store. obchodnice

If you are interested in high-speed doors with installation, our sales staff can take on you a contact (name, address, phone number) and agree with you on a personal meeting. The preferred option is if you meet any on-site installation. The technician will explain the installation options.

Based on the focus it writes an order according to which high-speed doors are made. After production will contact you to arrange a leading assembly and with you the date of installation.

Payments (deposit and surcharge) held in cash or bank transfer depends on agreement between you and our sales representative. A deposit of 50% pay to sales representative in the drafting of the order or we will issue proforma invoice. Surcharge will be paid during the assembly and testing functionality in cash.