Exterior blinds

Outside blinds are the most effective shading equipment preventing up to 80% sun rays from getting in. They protect the interior against overheating while preserving daylight in the room. exterierove_zaluzie
As confirmed by many analyses, temperature under 20°C and over 30°C impairs the thermal comfort and consequently lowers the work productivity by 30% and more.

Rotation of the lamellas regulates the temperature and light in the room and provides for comfortable interior temperature even in hot weather.
Outside blinds work as a modern architecture element on office buildings, schools as well as family or apartment houses. Rich palette of lamella colours brings a stylistic means for creative design and facade look. Wide lamellas adjusted from inside to any angle prevent curious looks from outside having a free view from inside.

Outside blinds may be installed to window directly or to a pre-created space under or on the facade.
You can control the blinds manually or with a motor drive. Central control is suitable for multiple blinds. One drive may operate more than one blind – but maximum three blinds per one drive located in the middle of the set. One rule must be observed – on each of the motor’s sides maximum 5 bearings – rotation gears may be placed.

OUTSIDE BLINDS TYPES

TYPE Z 90

Technical data:profil_z

Max. width:       400cm
Max. width of connected blinds operated by motor drive: 800cm
Min. width:        40cm operated with a crank
Min. width:        60cm (55cm) operated with motor drive
Max. height:     400cm

Max. area:     9m2 operated with a crank
Max. area:     14m2 operated with motor drive

Lamellas are made of aluminium rolled to a Z shape – surface treated from both sides, 90mm wide
Upper profile is made of zinc-coated steel sheet 56x58mm, lower profile is made of extruded aluminium of the same width as lamellas. Guiding profiles 20x20mm are made of extruded aluminium. Covering sheet is a bent aluminium sheet 1.5mm thick. Textile carriers and strips are made of a special synthetic fibre.

TYPE Z 70

profil_zTechnical data:
Max. width:       400cm
Max. width of connected blinds operated by motor drive: 800cm

Min. width:        40cm operated with a crank
Min. width:        60cm (55cm) operated with motor drive
Max. height:      400cm

Max. area:     9m2 operated with a crank
Max. area:     14m2 operated with motor drive

Lamellas are made of aluminium rolled to a Z shape – surface treated from both sides, 70mm wide
Upper profile is made of zinc-coated steel sheet 56x58mm, lower profile is made of extruded aluminium of the same width as lamellas. Guiding profiles 20x20mm are made of extruded aluminium. Covering sheet is a bent aluminium sheet 1.5mm thick. Textile carriers and strips are made of a special synthetic fibre.

TYPE C 80

Technical data:profil_c
Max. width:       400cm

Max. width of connected blinds operated by motor drive: 800cm

Min. width:        40cm operated with a crank
Min. width:        60cm (55cm) operated with motor drive
Max. height:      400cm
Max. area:     9m2 operated with a crank
Max. area:     14m2 operated with motor drive

Lamellas are made of aluminium rolled to a C shape with reinforced edges – surface treated from both sides, 80mm wide.
Upper profile is made of zinc-coated steel sheet 56x58mm, lower profile is made of extruded aluminium of the same width as lamellas. Guiding profiles 20x20mm are made of extruded aluminium. Covering sheet is a bent aluminium sheet 1.5mm thick. Textile carriers and strips are made of a special synthetic fibre.

How to proceed with order

There are two methods how to order the blinds – by telephone call or personally in the shop.obchodnice
It you wish to buy blinds with installation, our sales representative will visit you directly on the spot of future installation. This visit is free of charge, of course. Once the measuring is finished the sales representative will fill in an order form according to which the blind is produced. The product shall be delivered within three weeks from order and payment of the advance amount.
Payments (advance payment and due balance) are made in cash. 50% advance payment is paid directly to our sales representative with the order or a pro-forma invoice may be issued and posted to you. The outstanding amount will be paid after installation and testing in cash or by bank transfer order to our bank account.
Should you be interested in blinds without installation, best you can do is to visit our shop (Americká 2772, Kladno) with required dimensions of the blinds. You can choose the lamellas here and our shop assistant will fill in the order form and method of supply or delivery.